Відео

2,5"

Здравствуйте, Вы можете сделать заказ на нашем сайте. Все ссылки находятся в описании к видео.

Hi, Unfortunately we do not sell complete headlight assemblies. The headlight in the video was from a customer and was only used to make a video out of it.

For the whitest look I would recommend the CBN. They are 6200K. See link below. retrofitlab.com/products/osram-d2s-cool-blue-intense-next-gen-66240cbn-hcb-duo-box-hid-xenon-bulbs?_pos=9&_sid=df80b7a6c&_ss=r If you go for the CBB they are 7000K, but they lean more towards a blue light already.

@@Retrofitlab those are the cbi?

@@Mo-ij8re Yes, new generation

@@Retrofitlab are the CBB 7000k pure white as well ? how does CBB 7000k compare to CBA 6000k in color ?

@@Mo-ij8re At 7000K it will lean more towards a blue light instead of white. If you want the whitest look possible I would recommend the 6000K color.

2,5''

@@Retrofitlab can z1000 2015 use 3inch?

@@H.LaingChhay Unfortunately not

@@Retrofitlab hmm I love z1000 2015↑ and I want to use 3inch GTR s35 chip 12 but it's headlights so small I may choose z900 se instead.

I am not 100% sure what you mean, can you elaborate?

The best way is to keep reheating it constantly and scraping it with a flat screwdriver. Patience is required as well.

@@Retrofitlab thanks for advise . Ya the old silicone gum really quite hard tough to clean….

Hi, Unfortunately it does not have an E-mark. Though the light output will greatly increase and it has a razer sharp cut off line. We haven't had any customers come to us in the past 10 years for not passing TüV. retrofitlab.com/apps/help-center#hc-why-are-some-products-not-ece-approved

HI, See the discription of this video for the specifications. In this video we used these bulbs: 5500K XB35 D2S bulbs (See link below) retrofitlab.com/products/aharon-d2s-xb35-xenon-hid-bulbs?_pos=2&_sid=936f61322&_ss=r

@@Retrofitlab thank you Regarding wiring, how should we do it? I didn't see the explanation in the video knowing that the people who have this model car have an original H4 bulb power supply

@@davidelusue6732 Hi David, Are you not able to connect the wires? What bulbs do you have, did you place an order with us?

Yes, That is correct. For optimal heating you could choose to elevate the headlight as well so heat can go underneath and around. Make sure you face the glass of the headlight away from the direct heat of the heatgun.

Hi, If you have any questions regarding this kit, please contact us at. info@retrofitlab.com

Hi, Can you send me contact me at: info@retrofitlab.com I'd be happy to help you.

@@Retrofitlab I emailed you there waiting for response.

This is the solenoid cable. It activates the solenoid inside the BI-Xenon projector which, then activates the high beam. We have no experience changing the AFS assembly from one headlight to the other unfortunately.

@@Retrofitlab probably my car also have solenoid mechanism but doesn't have high beam function in D2S. Instead there is a high beam from H7 halogen lamp. So a simple reflector/projector with d2s socket would also work for my car? Probably the lights wont adjust when turning on, they'll have a fixed position

@@leonidasgr2003 Hi, Can you send me an Email at: info@retrofitlab.com

Same problem for me... No DRL et rear brake... Can t connect the white.

I just installed them 3 days ago (a pain in the ass to be honest since I had a tail tidy), mine came with some T connectors to pick the signal from the brake light plug (still trying to figure how to do it, I only got the turn signals working for now) and DRLs plug (I'll redo the cables since I have a delay of 1-2sec to them to light up). Hope it helps

Hi, We have a seperate video for the rear indicators. See this link ;). ua-cam.com/video/ghA78vy8jTw/v-deo.html&ab_channel=Retrofitlab.com

Hi, Yes you can put them in the oven as well. retrofitlab.com/apps/help-center#hc-at-what-temperature-do-i-heat-my-heatlight-to-open-it See this link.

Hi, We have a set available for 2014-2017 manufacturer year. retrofitlab.com/products/led-sequential-turn-signal-yamaha-mt-07-with-position-and-brake-light-4-pcs-kit?_pos=1&_sid=b2bebc5d3&_ss=r You can select it in the drop down menu on the side. ~Jesse

Hi, Can you please contact us via info@retrofitlab.com

Hi, Can you please explain. Or contact us via info@retrofitlab.com With kind regards, RFL

@Retrofitlab these headlights only fit the 2003, to 2007 model until they facelifted it in 2007 when it uses a different headlamp. That's all :)

@@daveytn Hi, Thank you for letting us know, I will take a look in to that and see if we need to change it the site and videos.

Sorry, we are not up-do-date on all rules and regulations in every country, so can't say for 100%. For what we know about the UK, when it is a halogen headlight, it isn't allowed to change the light source. So an "H" headlight can't have HID or LED bulbs. So although projectors have a very good light pattern instead of xenon bulbs in a halogen housing that give stray light, chances are it is not allowed. Your best option is to inform with an MOT mechanic for example.

@@RetrofitlabI see, how did you connect the h1 bulb to a h4 system?

@@TechFragOfficial we used an H4 diode cable: retrofitlab.com/products/h4-diode?_pos=1&_sid=6b3666e8e&_ss=r

Hi Eric, As for now we do not have an installation video for the BI-LED projector or plan to make one, though the installation process is almost the same. If you have any questions on the installation, please dont hesitate to contact us at. info@retrofitlab.com

Yes you can. The for the Z750 is from 2007-2012

@@Retrofitlab do you have angel eyes ?

@@NicolayPapangelo Hi, Yes we do. See link below. If they are for the Z750 upgrade kit you will need 72mm non canbus. retrofitlab.com/products/angel-eyes-halo-round-smd-led?_pos=1&_sid=4ea50a07f&_ss=r

Hi, Thank you for your feedback, we will look in to updating it in to our manual.

Hi, Can you maybe send us an E-mail at. info@retrofitlab.com

FZS1000: retrofitlab.com/products/yamaha-fzs1000-fz1-2001-2005-headlight-upgrade-kit FZS600: retrofitlab.com/products/yamaha-fzs600-fazer-fz6-2001-2004-headlight-upgrade-kit

You could mount the projectors from the video, and with some adjustments you can install a H7 bulb in the D2S projector. Contact us if you want to place such a custom order.

Any evidence to back that up?

@@Retrofitlab This is common knowledge. Just look at the manufacturer's information.

@@lordyamata9997 Our common knowledge seems to be different from yours it seems. Looking forward to read the source where you got the information ;).

Hi There, Can you send us a message via the contact form or directly to info@retrofitlab.com . I would be happy to help you out.

Correct, Bosch / AL

Glad to hear you are exctied about our products. Please contact us if you need any help

Hi Alexander, Could you mayeb send us an Email, There i can provide you with some more info on this topic. info@retrofitlab.com

No problem, happy to help!

In the test we are using D1/D2 bulbs. CBN indeed are not 6200K, they are around 4300K like OEM xenon. Or are you referring to CBB?

Normally you need to make a connection from the inside of the housing to the outside for the starter/ballast. So it is needed to make a hole, but installed correctly, the rubber seal is enough to make a good seal.

Once I get the idea in my head I would make it manage to look original I've done similar things in the past as well as stripping cloth heated Passat Estate seats & putting the heating pads inside the non heated leather seats I don't like doing 2nd best

Sorry, we don't sell headlight covers. Perhaps on Ebay.de ?

Please see this link: retrofitlab.com/products/led-sequential-turn-signal-yamaha-mt-07-with-position-and-brake-light-4-pcs-kit?_pos=2&_sid=e6057570a&_ss=r In the dropdown menu you are able to select the correct version.

Although the centric ring fits very tight around the lens holder, in time with vibrations, there is a small chance that it loosens and falls off. So a tiny bit of adhesive is a good way to prevent it.

Thanks!

It's a cardbox box we use to heat up the headlight ua-cam.com/video/r7D8dex_Sqg/v-deo.html

There is no difference between the left and right projector, they are identical :)

Which steps are missing for you?

Sul nostro sito 🙂 retrofitlab.com/products/bracket Kit completo: retrofitlab.com/products/kawasaki-z750-07-12-bi-xenon-headlight-upgrade-kit

Thanks for the order and good question. We also have a video with a different projector, but that is much harder to install, this is the correct one. But we also upgraded the projector from the Mini H1 to the TR mini, so the projector you have received is a bit different, but the basics of the mounting etc. is the same. When you have questions, please contact us :-) retrofitlab.com/pages/contact

Yes, it's LHT or RHT, it does not have a switch like on some (very little actually) OEM projectors. For people going on holiday for example, I know there are stickers/masks/beam deflectors to stick on your headlight temporarily to change the beam pattern.